Summers Superchisel - 5-Section Uživatelský manuál stáhnout pdf (Strana 18)

2-6

SECTION 2 – SET-UP OF CENTER SECTION

10. Attach wheels onto hubs with 5/8” wheel nuts (torque required: 170 ft-lbs).

11. Attach wing transport locks to center frame with 3/4” u-bolts.

– See Detail View A for location of front transport locks. Position rear transport locks at same

distance from center.

– Install Transport lock pins inside storage holes of transport locks.

12. Insert 1-1/2 x 10-3/8” eyebolts into wing lift cylinder attach base.

– Leave 1-1/2” nuts loose, they will need to be adjusted after wing is installed.

13. Attach wing lift cylinders to frame with pins and roll pins provided with cylinders.

– Four 5 x 36” cylinders (8K9650) are used.

REAR VIEW WALKING

TANDEM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 97 98

Žádné komentáře

Summers Superchisel - 5-Section Uživatelský manuál Strana 18